Home | English | Chinese(Simplified) | Chinese(Traditional) | Wap

WebMaster Online Tools


MIME Base64 uses A–Z, a–z, and 0–9 for the first 62 values. There are other similar systems, usually derived from Base64, that share this property but differ in the symbols chosen for the last two values; an example is UTF-7.

Privacy-Enhanced Mail (PEM)

The first known use of the encoding now called MIME Base 64 was in the Privacy-enhanced Electronic Mail (PEM) protocol, proposed by RFC 989 in 1987. PEM defines a "printable encoding" scheme that uses Base 64 encoding to transform an arbitrary sequence of octets to a format that can be expressed in short lines of 7-bit characters, as required by transfer protocols such as SMTP.

The current version of PEM (specified in RFC 1421) uses a 64-character alphabet consisting of upper- and lower-case Roman alphabet characters (A–Z, a–z), the numerals (0–9), and the "+" and "/" symbols. The "=" symbol is also used as a special suffix code. The original specification, RFC 989, additionally used the "*" symbol to delimit encoded but unencrypted data within the output stream.

To convert data to PEM printable encoding, the first byte is placed in the most significant eight bits of a 24-bit buffer, the next in the middle eight, and the third in the least significant eight bits. If there are fewer than three bytes left to encode (or in total), the remaining buffer bits will be zero. The buffer is then used, six bits at a time, most significant first, as indices into the string: "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/", and the indicated character is output.

The process is repeated on the remaining data until fewer than four octets remain. If three octets remain, they are processed normally. If fewer than three octets (24 bits) are remaining to encode, the input data is right-padded with zero bits to form an integral multiple of six bits.

After encoding the non-padded data, if two octets of the 24-bit buffer are padded-zeros, two "=" characters are appended to the output; if one octet of the 24-bit buffer is filled with padded-zeros, one "=" character is appended. This signals the decoder that the zero bits added due to padding should be excluded from the reconstructed data. This also guarantees that the encoded output length is a multiple of 4 bytes.

PEM requires that all encoded lines consist of exactly 64 printable characters, with the exception of the last line, which may contain fewer printable characters. Lines are delimited by whitespace characters according to local (platform-specific) conventions.


The MIME (Multipurpose Internet Mail Extensions) specification, defined in RFC 2045, lists "base64" as one of several binary-to-text encoding schemes. MIME's base64 encoding is based on that of the RFC 1421 version of PEM: it uses the same 64-character alphabet and encoding mechanism as PEM, and uses the "=" symbol for output padding in the same way.

MIME does not specify a fixed length for base64-encoded lines, but it does specify a maximum line length of 76 characters. Additionally it specifies that any extra-alphabetic characters must be ignored by a compliant decoder, although most implementations use a CR/LF newline pair to delimit encoded lines.

Thus, the actual length of MIME-compliant base64-encoded binary data is usually about 137% of the original data length, though for very short messages the overhead can be a lot higher because of the overhead of the headers. Very roughly, the final size of base64-encoded binary data is equal to 1.37 times the original data size + 814 bytes (for headers).



UTF-7, described in RFC 2152, introduced a system called Modified Base64. This data encoding scheme is used to encode UTF-16 as ASCII characters for use in 7-bit transports such as SMTP. It is a variant of the base64 encoding used in MIME.

The "Modified Base64" alphabet consists of the MIME base64 alphabet, but does not use the "=" padding character. UTF-7 is intended for use in mail headers (defined in RFC 2047), and the "=" character is reserved in that context as the escape character for "quoted-printable" encoding. Modified base64 simply omits the padding and ends immediately after the last BASE64 digit containing useful bits (leaving 0-4 unused bits in the last base64 digit)



OpenPGP, described in RFC 2440, describes Radix-64 encoding, also known as "ASCII Armor". Radix-64 is identical to the "base64" encoding described from MIME, with the addition of a 24-bit CRC checksum. The checksum is calculated on the input data before encoding; the checksum is then encoded with the same base64 algorithm and, using an additional "=" symbol as separator, concatenated to the encoded output data.


RFC 3548

RFC 3548 (The Base16, Base32, and Base64 Data Encodings) is an informational (non-normative) memo that attempts to unify the RFC 1421 and RFC 2045 specifications of base64 encodings, alternative-alphabet encodings, and the seldom-used Base 32 and Base 16 encodings.

RFC 3548 forbids implementations from generating messages containing characters outside the encoding alphabet, unless they are written to a specification that refers to RFC 3548 and specifically requires otherwise; it also declares that decoder implementations must reject data that contains characters outside the encoding alphabet, unless they are written to a specification that refers to RFC 3548 and specifically requires otherwise.


RFC 4648

This RFC obsoletes RFC 3548 and focuses on base 64/32/16:

This document describes the commonly used base 64, base 32, and base 16 encoding schemes. It also discusses the use of line-feeds in encoded data, use of padding in encoded data, use of non-alphabet characters in encoded data, use of different encoding alphabets, and canonical encodings.



A quote from Thomas Hobbes's Leviathan:

Man is distinguished, not only by his reason, but by this singular passion from other animals, which is a lust of the mind, that by a perseverance of delight in the continued and indefatigable generation of knowledge, exceeds the short vehemence of any carnal pleasure.

is encoded in MIME's base64 scheme as follows:


In the above quote the encoded value of Man is TWFu. Encoded in ASCII, M, a, n are stored as the bytes 77, 97, 110, which are 01001101, 01100001, 01101110 in base 2. These three bytes are joined together in a 24 bit buffer producing 010011010110000101101110. Packs of 6 bits (6 bits have a maximum of 64 different binary values) are converted into 4 numbers (24 = 6x4) which are then converted to their corresponding values in Base 64.

Text content M a n
ASCII 77 97 110
Bit pattern 0 1 0 0 1 1 0 1 0 1 1 0 0 0 0 1 0 1 1 0 1 1 1 0
Index 19 22 5 46
Base64-Encoded T W F u

As this example illustrates, Base 64 encoding converts 3 uncoded bytes (in this case, ASCII characters) into 4 encoded ASCII characters.

The example below illustrates how shortening the input changes the output padding:

Input ends with: carnal pleasure.  
Output ends with: c3VyZS4=
Input ends with: carnal pleasure
Output ends with: c3VyZQ==
Input ends with: carnal pleasurOutput ends with: c3Vy
Input ends with: carnal pleasuOutput ends with: c3U=

Note that the same characters will be encoded differently depending on their position within the three-octet group which is encoded to produce the four characters. For example

The Input: leasure.   Encodes to bGVhc3VyZS4=The Input: easure.    
Encodes to ZWFzdXJlLg==The Input: asure.     Encodes to YXN1cmUuThe Input: sure.
Encodes to c3VyZS4=


URL applications

Base64 encoding can be helpful when fairly lengthy identifying information is used in an HTTP environment. Hibernate, a database persistence framework for Java objects, uses Base64 encoding to encode a relatively large unique id (generally 128-bit UUIDs) into a string for use as an HTTP parameter in HTTP forms or HTTP GET URLs. Also, many applications need to encode binary data in a way that is convenient for inclusion in URLs, including in hidden web form fields, and Base64 is a convenient encoding to render them in not only a compact way, but in a relatively unreadable one when trying to obscure the nature of data from a casual human observer.

Using a URL-encoder on standard Base64, however, is inconvenient as it will translate the '+' and '/' characters into special percent-encoded hexadecimal sequences ('+' = '%2B' and '/' = '%2F'). When this is later used with database storage or across heterogeneous systems, they will themselves choke on the '%' character generated by URL-encoders (because the '%' character is also used in ANSI SQL as a wildcard).

For this reason, a modified Base64 for URL variant exists, where no padding '=' will be used, and the '+' and '/' characters of standard Base64 are respectively replaced by '-' and '_', so that using URL encoders/decoders is no longer necessary and has no impact on the length of the encoded value, leaving the same encoded form intact for use in relational databases, web forms, and object identifiers in general.

Another variant called modified Base64 for regexps uses '!-' instead of '*-' to replace the standard Base64 '+/', because both '+' and '*' may be reserved for regular expressions (note that '[]' used in the IRCu variant above would not work in that context).

Another variant called modified Base64 for filename uses '-' instead of '/', because Unix filenames can not contain '/'.

There are other variants that use '_-' or '._' when the Base64 variant string must be used within valid identifiers for programs, or '.-' for use in XML name tokens (Nmtoken), or even '_:' for use in more restricted XML identifiers (Name).


Other applications

Base64 can be used in a variety of contexts:

  • Evolution and Thunderbird use Base64 to obfuscate e-mail passwords[1]
  • Base64 can be used to transmit and store text that might otherwise cause delimiter collision
  • Base64 is often used as a quick but insecure shortcut to obscure secrets without incurring the overhead of cryptographic key management
  • Spammers use Base64 to evade basic anti-spamming tools, which often do not decode Base64 and therefore cannot detect keywords in encoded messages.
  • Base64 is used to encode character strings in LDIF files
  • Base64 is sometimes used to embed binary data in an XML file, using a syntax similar to <data encoding="base64">......</data> e.g. Firefox's bookmarks.html.
  • Base64 is used to encode binary files such as images within scripts, to avoid depending on external files.
  • The data URI scheme can use Base64 to represent files. For instance, background images can be specified in a CSS stylesheet file as data: URIs, instead of being supplied in separate image files.